本机器是我公司近年来研发的新一代全自动夹胶玻璃切割设备。具有操作简单，适应性高，切割精度高等特点。
This machine was research and development in our company. IT`s easy to use ,highly adaptab.
一：机器结构(Structure of machine)
机器框架采用国标方管、槽钢、方管焊接而成。重要部位退火处理后大型龙门铣加工。稳定性能高，强度大。采用两段式结构组合而成。第一段为人工辅助上料及传输部分，配有自动定位系统及靠栅定位系统。第二段包含上下对刀切割系统、切膜系统、加热系统、辅助下料系统。
Frame was made with international square steel tube and box iron by welding.The key position had been annealing treatment and gantry milling. So the frame has high stability and strength.
Two-part construction to assemble the machine. The first part is the artificial auxiliary feeding and transmission part, equipped with automated positioning system. The second paragraph contains the upper and lower knife cutting system, the cutting film system, the heating system, and the auxiliary discharge system.
二：机器参数(Machine Parameters)
1. 机器安装尺寸：6735*5640*1412mm（预估）
机器包装尺寸：11700*2260*1500mm（40尺标柜）
重量：4500KG（毛重）
2.加工范围：最大3700*2500mm；最小400*400mm
3. 切割厚道范围：3+X+3mm---8+X+8mm
4. 切割速度：1—2刀/分钟
5.加热温度和时间：人为设定
6. 龙门刀头移动速度：0---80米/分钟。
7.刀头下压压力及掰片压力：气动比例阀控制
1.Size of machine:6735*5640*1412mm
2.Weight:about 4500KG
3.Processing range of glass size:400*400mm --- 3700*2500mm
4.Processing range of glass thickness:3+X+3mm---8+X+8mm
5.Cutting speed: cutting twice in one minute
6.Temperature and time of heating: Adjust by operater
7.Pressure of pushing and breaking: Adjust by operater
三 ：机器配置(Machine configuration)（可指定配置）
1. 伺服电机：台湾台达
2. 驱动器：台湾台达
3. PLC及触摸屏：台湾台达
4. 电器原件：正泰
5.程序：自行设计
6. 加热棒：国产
7.同步带、同步轮：国产
8. 气缸及刀体：国产
9. 刀轮：进口
10.风机：国产
11.传动轴：国产
12.台面：复合板
13.毛毡：工业毛毡
14.比例阀：日本SMC
15. 整机框架：方管自焊接
16. 钣金罩壳：喷塑/喷漆
1.Motor:Delta SERVO MOTOR
2.Drive: Delta
3.Plc and touch screen: Delta
4.Electrical elements: CHINT
5.Program: Self-Design
6.Heatting tube: China
7.Timing belts and wheels: China
8.Air cylinder and knife: Self-Design
9. Knife wheels: imported from Japan
10.Draught fan: China
11.Transmission shaft: China
12.Felt:imported
13.Proportional control valve: SMC from Japan
四：动作流程描述(Technical process)
人机界面HMI设定待切割玻璃宽度、长度、下刀压力等系统参数——机械上片将玻璃放置到切割台面的同步传输带区域——玻璃根据输入的切割尺寸自动传输定位（此处配有机械拉边定位）——刀头位于零点一一气动下刀、上下刀轮对切（此处可选配自动注油系统）——切割完毕抬刀——上压轮启动压片，下表面玻璃掰开——下压轮向上顶起玻璃，上表面玻璃掰开——加热棒启动加热一一真空吸盘吸附切线两侧玻璃，将切缝拉开一一切膜刀启动切膜一一切割动作完成，工件整体传输到下段切线位置（此处如需调节切割方向，需手工完成动作）一一整体切割动作完毕一一配合气浮组件人工将加工后的玻璃移动至下片翻转托架。
Man-machine interface HMI setting system parameters such as glass width, length, under knife pressure, etc.一一mechanical placement of glass into the synchronous belt area of the cutting table一一Automatic transmission and positioning of glass according to the cut size of input（There's a location system）一一Knife head at zero一一Pneumatic lower knife, upper and lower knife wheel cut（There's an automatic injection system）一一Cut and lift一一The upper press starts the press, and the lower surface glass breaks open一一Under the top rod up the glass, the upper surface of the glass break open一一Heat bar, start heating一一The vacuum suction cup absorbs the glass on both sides of the tangent line and pulls the cutting seam apart一一Cutting film（PVB or EVA）一一The cutting action is complete and the entire artifact is transferred to the next segment tangent position（If you need to turn around and cut, you need to do it manually）一一Whole cutting is complete.一一Manually move the processed glass to the lower slide flip bracket with the air float assembly.
五：机器优势(advantage)
1. 整机配有自动定位机构，可在人机界面人工设定需要加工的长宽尺寸，弥补了之前几代的人工定位造成的不准确和生产效率低下的缺点。
2.采用全伺服控制，性能稳定，精度确保，效率翻倍。
1. Can automatically set the cutting length width, labor saving.
2. Compare the previous ones,faster, more accurate.
